It is absolutely essential that any fuel pump at a commercial gas station be in peak operating condition. This is because the fuel is pumped from very deep reservoirs and the demand can often be grueling on the machines. Any failure in the pumping of the fuel could very well have dire consequences. Here are some tips on fixing the pump yourself before calling in the gas station repair service california.
The first thing that will need to be done is to shut off the fuel to the pump. The component that is causing the malfunction will need to be determined. This may be easy or hard, it just depends on the individual situation as there are many small parts which make up a fuel pump.
If the nozzle is the part that is malfunctioning, the entire end will have to be replaced. Remove it from the end of the hose and replace it with a new one. The same method is used if the lever on the nozzle has become defective.
If the hose is the piece that is defective, it will need to be removed from the pump using a pair of vice grips. An open-end wrench may also be used if grips are not available. While the hose may be repaired, it is always possible that the fix may not hold. This is why it usually suggested by experts that the hose be replaced. This gives the pump owner the peace of mind that the hose is brand-new and not merely patched.
If the fuel seems to not be flowing freely, the valves may need to be replaced. To do this, a professional repair company will need to be called in. This is because the repair work requires special training to perform.
As you can see, there are some fixes for all level of repair knowledge. However, if you are uncomfortable in making the repair in any way, it is best to hire a pro to do the work for you. There is no sense in risking further damage or violating safety protocol by trying to do it yourself.